Author Topic: Clinched Routes Highway Shields  (Read 79725 times)

0 Members and 2 Guests are viewing this topic.

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #75 on: August 17, 2017, 10:00:13 pm »
On a related note: I don't have the spreadsheet I was using, but I think we would be able to get shields for cannb if the system was split (see http://tm.teresco.org/forum/index.php?topic=2171.msg7316#msg7316)
Nice. If you are or someone else is thinking of making shields and waiting on me to make the split, I can go ahead and do so.
I'm not familiar with how the shield generation code works, but I've no doubt that 3 systems for 3 shield types would be more easily doable than 3 shield types for 1 system.
Shall I go ahead and make the split?

You can go ahead, but there's no rush at least on my end - it might be a while before I get to it.

Offline rickmastfan67

  • TM Collaborator (A)
  • Hero Member
  • *****
  • Posts: 1829
  • Gender: Male
  • Last Login:Yesterday at 05:48:09 am
Re: Clinched Routes Highway Shields
« Reply #76 on: August 18, 2017, 04:50:14 am »
Hope there's a way for us to figure out in future to show 2 shields for FL routes that have both 'toll' and non-toll segments since I'm getting really close to finishing the set and to send it to preview mode. :)

Offline Bickendan

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 543
  • Last Login:March 26, 2024, 08:55:56 pm
Re: Clinched Routes Highway Shields
« Reply #77 on: August 20, 2017, 04:38:23 am »
Hope there's a way for us to figure out in future to show 2 shields for FL routes that have both 'toll' and non-toll segments since I'm getting really close to finishing the set and to send it to preview mode. :)
This would be very useful for the Oregon Highways set I'm going to be drafting soon.

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #78 on: August 20, 2017, 01:34:55 pm »
Hope there's a way for us to figure out in future to show 2 shields for FL routes that have both 'toll' and non-toll segments since I'm getting really close to finishing the set and to send it to preview mode. :)
This would be very useful for the Oregon Highways set I'm going to be drafting soon.

There are other systems where this would be needed, such as the aforementioned usapr, and some of the UK/Ireland routes where some parts are motorways and some are not.

Offline si404

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 1944
  • Last Login:Yesterday at 08:28:40 pm
Re: Clinched Routes Highway Shields
« Reply #79 on: August 20, 2017, 01:53:45 pm »
some of the UK/Ireland routes where some parts are motorways and some are not.
Those have been two separate systems since before I took over (I split the Ax(M) routes from the M routes in GB & NI).

However, A roads (ignoring Ax(M)s) can be signed with black text on white (non-primary) or yellow text on green (primary). All Jersey's are primary, but elsewhere many are entirely primary, many are entirely non primary and many have parts that are primary and parts that are non-primary.

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #80 on: August 20, 2017, 04:01:46 pm »
Just put in a pull request for usaar (currently part of usansf) and mtqn (the same as fran). Some others might come later this week.

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 2732
  • Last Login:Yesterday at 10:14:53 pm
Re: Clinched Routes Highway Shields
« Reply #81 on: August 20, 2017, 05:22:46 pm »
Just put in a pull request for usaar (currently part of usansf) and mtqn (the same as fran). Some others might come later this week.

These are live on the main site.

Offline Jim

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 2732
  • Last Login:Yesterday at 10:14:53 pm
Re: Clinched Routes Highway Shields
« Reply #82 on: August 20, 2017, 05:26:08 pm »
Arkansas ones are showing as "000A".

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #83 on: August 20, 2017, 05:36:21 pm »
Arkansas ones are showing as "000A".

I think this last pull request should do the trick. Probably time to set up my dev instance to catch these errors...

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #84 on: August 22, 2017, 02:17:08 pm »
usaar is fixed, and canqca is now live.

Offline mapcat

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 1627
  • Last Login:March 26, 2024, 09:50:25 am
Re: Clinched Routes Highway Shields
« Reply #85 on: August 22, 2017, 07:10:09 pm »
The AR numbers are offset slightly (on AR 151, at least), and the 3-digit canqca numbers aren't all the same size: 1, 4, 5, 6, and 7 are slightly taller than 0, 2, 3, and 9.

Edit: at zooms less than 100% or greater than 175% on Chrome, the autoroute numbers are fine.
« Last Edit: August 22, 2017, 07:25:52 pm by mapcat »
Clinched:

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #86 on: August 22, 2017, 08:21:25 pm »
The AR numbers are offset slightly (on AR 151, at least), and the 3-digit canqca numbers aren't all the same size: 1, 4, 5, 6, and 7 are slightly taller than 0, 2, 3, and 9.

Edit: at zooms less than 100% or greater than 175% on Chrome, the autoroute numbers are fine.

I looked at https://commons.wikimedia.org/wiki/Category:Diagrams_of_Arkansas_State_Highway_shields and it seems that there's different font sizes used depending on what digits are in the route number. It will take some more work to fix that, unfortunately.

Offline mariethefoxy

  • Newbie
  • *
  • Posts: 12
  • Last Login:November 07, 2017, 03:52:41 pm
Re: Clinched Routes Highway Shields
« Reply #87 on: August 22, 2017, 11:59:32 pm »
theres an error on the routes NH 101 and NH 111, the word NH is being spelled out with the numbers

Offline yakra

  • TM Collaborator
  • Hero Member
  • *****
  • Posts: 4234
  • Last Login:February 13, 2024, 07:19:36 pm
  • I like C++
Re: Clinched Routes Highway Shields
« Reply #88 on: August 23, 2017, 12:52:09 am »
theres an error on the routes NH 101 and NH 111, the word NH is being spelled out with the numbers
A consistent glitch across the entire usanh system:
All non-letter-suffixed routes are spelled out, with the "NH".
Letter-suffixed route shields look fine.
Sri Syadasti Syadavaktavya Syadasti Syannasti Syadasti Cavaktavyasca Syadasti Syannasti Syadavatavyasca Syadasti Syannasti Syadavaktavyasca

Offline rschen7754

  • Jr. Member
  • **
  • Posts: 50
  • Gender: Male
  • Last Login:February 28, 2024, 12:49:09 am
    • Rschen7754
Re: Clinched Routes Highway Shields
« Reply #89 on: August 23, 2017, 01:29:35 am »
theres an error on the routes NH 101 and NH 111, the word NH is being spelled out with the numbers
A consistent glitch across the entire usanh system:
All non-letter-suffixed routes are spelled out, with the "NH".
Letter-suffixed route shields look fine.

Just put in a pull request to fix this and usatx, and add the first New Brunswick shield.

For the New Brunswick shields, the font is a bit off, but the Commons shields use a non-free font.