Travel Mapping

Highway Data Discussion => Updates to Highway Data => Solved Highway data updates => Topic started by: rickmastfan67 on August 24, 2019, 10:45:13 pm

Title: NC: Truck routes (Morganton)
Post by: rickmastfan67 on August 24, 2019, 10:45:13 pm
Oh boy, just came across this crazy mess of Truck routes & Bypass routes.  The only legit Truck route I can find in that city, is the NC-18 one that we're missing currently on the site.

As for the US-64 & US-70 Truck routes, they honestly shouldn't have the 'Truck' banner, as they are the mainline for both of the US highways there.  I've seen both Truck & Bypass for each of them.
So, in my honest opinion, we should get rid of both US-64 & US-70 Truck in Morganton.  If I remember correctly from the old manual, if a Truck route or Bypass route fills the role of the mainline, and there's no posted mainline, that section of highway should only be in the mainline file to prevent unnecessary duplication (if anybody else wants to chime in on this, please do so).


Missing:
NC-18 Truck (1 (https://goo.gl/maps/AMEMafRLcgko635W6), 2 (https://goo.gl/maps/The6PPKbPjQgcdcn7)) route (https://goo.gl/maps/wTGNhmVY2aTNLm4L7)

=====

On a side note, the 'US64Bus/18' point in US-64's file is currently WAY off of the intersection.  It needs to be corrected.  NC-18, US-64 Trk, & US-64 Bus files all have the same issue too.
Title: Re: NC: Truck routes (Morganton)
Post by: mapmikey on October 08, 2019, 03:20:28 pm
There are also NC 18 Business shields on the north end but these are erroneous (no shields on south end and NCDOT county maps show mainline 18 through town still).

Added NC 18 Truck and will delete the US 64-70 Truck routes here
Title: Re: NC: Truck routes (Morganton)
Post by: yakra on October 10, 2019, 04:53:20 pm
NC18's point didn't get moved, leaving a couple concurrencies broken.
US64_W http://www.openstreetmap.org/?lat=35.764431&lon=-81.689798
->
US64_W http://www.openstreetmap.org/?lat=35.764622&lon=-81.690474
Title: Re: NC: Truck routes (Morganton)
Post by: mapmikey on October 16, 2019, 10:05:23 pm
corrected and submitted...

thanks