Travel Mapping
Highway Data Discussion => Updates to Highway Data => Solved Highway data updates => Topic started by: Markkos1992 on February 11, 2021, 08:03:03 pm
-
US 64 ALT (Bethel):
1. Posting shows this route extended along US 258/NC 111/NC 122 to US 64 (Exit 486) (https://www.google.com/maps/@35.8897725,-77.5315227,3a,75y,271.96h,81.51t/data=!3m6!1e1!3m4!1sYFp1Zevt8Kj6pibD_bC-Rg!2e0!7i13312!8i6656). Also US258/64Bus should be changed to US258/33.
2. NC33_S should be NC33_E (https://www.google.com/maps/@35.878042,-77.5224679,3a,75y,177.79h,98.5t/data=!3m6!1e1!3m4!1sqzQ7gAtxky-vgbCMDlKkVQ!2e0!7i13312!8i6656).
US 258:
1. US64/111 should be US64(485).
2. US64_E should be US64(486).
3. NC111_E should be NC111_N.
4. NC122 should be NC122_N.
NC 33: US64Alt should be US64Alt_E.
NC 111:
1. NC122_W should be NC122_S (https://www.google.com/maps/@35.821374,-77.6347817,3a,75y,202.49h,88.97t/data=!3m6!1e1!3m4!1sKw0hHVnVy03QR9fa7NxiNQ!2e0!7i13312!8i6656).
2. US64_W should be marked as closed.
3. The US64/258 needs to be synced with US 64 and US 258 (also affects US 64 Alternate (Tarboro), which is currently synced with NC 111 and NC 122)). Also US64/258 should be US64(485).
4. US64_E should be US64(486).
5. It looks like the first shaping point between US258_N and NC142 could be made into a visible point at Chinquapin Rd (ChiRd) (https://www.google.com/maps/@35.8800958,-77.4549993,3a,37.5y,314.23h,85.43t/data=!3m6!1e1!3m4!1s8SQaaBjcH1QmJbHES2etMQ!2e0!7i13312!8i6656), which connects directly to US 64.
6. It looks like the shaping point between NC142 and NC11/42 could be made into a visible point at Old Cotton Rd (OldCotRd) (https://www.google.com/maps/@35.9446824,-77.3437753,3a,75y,296.37h,90.36t/data=!3m6!1e1!3m4!1sE_4FRH-VhaTArg25fN-ySg!2e0!7i13312!8i6656).
NC 122:
1. NC111_TarW should be NC111_TarS. NC111_TarE should be NC111_TarN.
2. US64_W should be US64(484).
3. HowAve should be HowAve_W (https://www.google.com/maps/@35.8938015,-77.5917519,3a,75y,44.32h,87.29t/data=!3m6!1e1!3m4!1sbOkaCdck37naajOdi44huw!2e0!7i13312!8i6656).
4. See number 3 under NC 111. Also US64/258 should be US64(485).
5. US64_E should be US64(486).
6. I recommend checking to see if any of the shaping points between US258_N and NC97 should be made visible somehow.
-
All changes made.
Note this eliminates US64altbet entirely as the two US 64 ALT routes are posted as one continuous route in both directions...
-
The route link on the update page goes to a route does not exist page. nc.us64alttar is the link instead of nc.us064alttar
-
typo fix was requested