color codes

[si404]

Exactly. I picked ISR as an Asian mapview example, as it contains asim system (red;3) and isrh (lightsalmon;4).

Personally I don't mind a colour clash between these two systems - asim doesn't recognise the state of Israel and vice versa, however (as with eure and usai) continental systems don't seem to have the signage requirement - and - with the exception of a brief bit of isrf, asim in ISR is entirely concurrent with isrh.

It's similar with asiah in regions where there are tier 4 systems - pretty much unsigned in those regions, and almost entirely concurrent with the tier 4 systems.

Also asiah and asim are only really red as a default.

But, certainly, making unclinched routes of those colours more distinct is a good thing as it increases flexibility with the palette should we decide on a change.

[Jim]

I'm going to make the color scheme I previously had on tmtest and seemingly partially had on tm the default.  I heard no objections, at least.

[yakra]

To clarify, it was also only partially implemented on tmtest.

colorCodes[3] = { name: "yellow", unclinched: "rgb(255,255,100)", clinched: "rgb(232,176,0)" };
->
colorCodes[3] = { name: "yellow", unclinched: "rgb(255,216,100)", clinched: "rgb(232,176,0)" };

Sounds good to me though. I think all-in-all, it's an improvement on the previous defaults.
We can still take some time to tweak the untraveled red vs. traveled lightsalmon contrast.

[Jim]

To clarify, it was also only partially implemented on tmtest.

colorCodes[3] = { name: "yellow", unclinched: "rgb(255,255,100)", clinched: "rgb(232,176,0)" };
->
colorCodes[3] = { name: "yellow", unclinched: "rgb(255,216,100)", clinched: "rgb(232,176,0)" };

Sounds good to me though. I think all-in-all, it's an improvement on the previous defaults.
We can still take some time to tweak the untraveled red vs. traveled lightsalmon contrast.

Fixed on the main site, thanks.

[yakra]

tmtest is still using (255,255,100)

[Jim]

tmtest is still using (255,255,100)

Updated tmtest also now.

[afarina]

My apologies for resurrecting an idle thread, but I've only been hanging out on GitHub and not here yet. I see the talk of customizing the colors and the ability to put it directly into the web address. It makes me wonder: is there a way to embed these into a user's list file? I suppose I could see the setup to where a user customizes how their map appears with their own set of colors. It wouldn't allow for a usage across the board, perhaps, but it might be a nice step in that direction.

Cheers,
A

[Jim]

My apologies for resurrecting an idle thread, but I've only been hanging out on GitHub and not here yet. I see the talk of customizing the colors and the ability to put it directly into the web address. It makes me wonder: is there a way to embed these into a user's list file? I suppose I could see the setup to where a user customizes how their map appears with their own set of colors. It wouldn't allow for a usage across the board, perhaps, but it might be a nice step in that direction.

Cheers,
A

https://github.com/TravelMapping/DataProcessing/issues/65

[michih]

I wanna highlight untraveled routes. I thought I can swap the two codes for each tier but it doesn't work (but I think it was possible in the past):

http://travelmapping.net/user/mapview.php?units=miles&sys=chea&u=michih&colors=tier1:rgb(100,100,255):rgb(0,0,220) standard
http://travelmapping.net/user/mapview.php?units=miles&sys=chea&u=michih&colors=tier1:rgb(0,0,220):rgb(100,100,255) swapped

Traveled and untraveled segments are faded. What's wrong?