Australia

[si404]

South Australia, Western Australia and Northern Territories codes should be AUS-SA, AUS-WA, and AUS-NT. The reason they had three letter codes before the AUS- was added was as WA and NT clash (and SA was given a third letter to not look odd).

The state/territory codes can be used in csvs, rather than spelling out (cf the multi-state USA systems).

The following routes are connected to each other:

ausqld.m001,ausnsw.m001bal

ausnsw.a001she,ausvic.a001

ausvic.a001war,aussa.a001mtg

ausnt.n001,ausqld.n001

auswa.n001,ausnt.n001bul

PS: I can fix these if wanted to.
PPS: the WA part of N1 is missing the SA border point - just something I noticed during my quick look over, eating dinner.
PPPS: I don't know whether it's the looking at Australia, or the tinnie (of the brand that Australians don't drink, but ship over to blighty for the poms), or both, but I've got the Round the Twist theme stuck in my head. If only it was Nathan Lyon's off stump flying out.

[michih]

Sorry, I was not 100% sure about region codes and used codes from regions.csv - plus AUS- of course
csv files had a lot of issues and I just wanted to get them live. Fixing all issues was too much for my limited knowledge about Australia et cetera.

[si404]

Smashed it, though sadly not quite as skilled (or as high-stakes) as Johnny smashed it (though thankfully, I'm not carrying a broken shoulder, I have had enough amber nectar to start thinking songs about sheep rustlers suicides might be worth singing).

Those sandpaper-using convicts even get the starts of a green-and-gold colour scheme (yellow for state routes) to match their national colours.

[Bickendan]

I didn't catch that both Tasmania N1s are out of bounds and every point needs to adjusted by 360° x.x

[Bickendan]

Is there a particular need to keep the A1 and M1 segments in alphabetical order or does the database do that automatically? My draft .csvs had them in clockwise order to track each segment geographically. (I'm not worried about the state/territory order; that can stay in alphabetical order)

[si404]

That's the website.

[Bickendan]

Gotcha.

I'm going to go over the data check errors and fix them tomorrow.  I'm impressed the long segments (SAS A1, QLD A1, N1, and WA and NT N1 didn't have any.

[si404]

Anyone mind if I start doing some other routes?

[Bickendan]

Go for it. I'd wait on doing any in Tasmania until I fix all the out of bound longitudes.

[si404]

Cool

I've done all the motorways, and I've made a start on further A roads.

[si404]

I'd wait on doing any in Tasmania until I fix all the out of bound longitudes.

I've taken the liberty of doing this.

[Bickendan]

Renamed the thread to Australia.

[si404]

Top level systems are now preview.

I've not touched the N/A/M/R/B1 files, save to add the A1 heading south out of Darwin (GMSV has it signed most of the way).

The A road system is a little annoying - there's lots of national routes, many of which cross state lines, but then there's Brisbane, Sydney and Adelaide metro-area routes that clash - Brisbane with QLD's routes, most of which the state changed number of. Is it a national system? Is it state systems? Is it national, state and city systems all using the same alphanumeric system? Yes! 

As an extreme, there's 6 A3's - two of which are in Queensland on entirely different routes!

[Bickendan]

The Darwin-Katherine portion of N1 is really A1 then, despite what OSM says?
If so, the Bullah file can be combined with the main N1 file where they meet in Katherine.

[si404]

I saw it was signed in several places as A1 and that was the obvious place to split. I left the files you made alone, hence why the E-W road isn't one route.

Looking further, I think the Stuart Hwy portion is almost entirely signed as A1, so I'm going to investigate further.