points @ region boundaries that might have the wrong labels

[yakra]

Code: [Select]

AH3@RUS/MNG A340@RUS/MGL AH3@RUS/MNG
E30@BLR/RUS M01@BEL/RUS AH6@RUS/BLR E30@BLR/RUS M1@RUS/BLR
AP68@PV/CL E804@RI/CL AP68@PV/CL E804@RI/CL
EA2.1@TZA/UGA RTR15@KEN/TZA T4@UGA/TZA EA2.1@TZA/UGA

[michih]

M01@BEL/RUS -> M01@BLR/RUS in blr.m001.wpt

[si404]

Code: [Select]

AH3@RUS/MNG A340@RUS/MGL AH3@RUS/MNG
E30@BLR/RUS M01@BEL/RUS AH6@RUS/BLR E30@BLR/RUS M1@RUS/BLR
EA2.1@TZA/UGA RTR15@KEN/TZA T4@UGA/TZA EA2.1@TZA/UGAThese all look like one route travelling one direction and the other travelling the other.

Code: [Select]

AP68@PV/CL E804@RI/CL AP68@PV/CL E804@RI/CLIssue there for me to deal with.

M01@BEL/RUS -> M01@BLR/RUS in blr.m001.wpt

I'll fix that and look for others like it (which if there aren't any is purely as I've already dealt with them). Belarus has basically been ignored for ages, and is on my list for regions to sort out - after Georgia, Armenia, Azerbaijan and Kazakhstan which are considerably outdated wrt construction, etc and in need of a spruce up.

[yakra]

I should have explained the code block & its context.
Each line is a group of colocated points, so many of them are surely correct. (So yes, RUS/BLR vs BLR/RUS etc. are legit.)
There are 1 or 2 mismatches on each line, a "one of these things is not like the other" thing.

RUS A340: RUS/MGL -> RUS/MNG
TZA RTR15: KEN/TZA -> UGA/TZA
And of course what you both already commented on.

I'll fix that and look for others like it

No big need to treat looking for more as a priority IMO. While the search that yielded these wasn't exhaustive (it only looked at cases with 3+ colocated points), this can become a datacheck. It would only miss:
• Routes ending at a region boundary with no colocated points
• Cases of all colocated points at the boundary listing the wrong two regions -- unless...

[si404]

I should have explained the code block & its context.

I was giving it a quick glance - any explanation would have been skimmed too and probably wouldn't have been understood.

There's no many, so perhaps I'll get around to it some time this week. If not, a lot of the busyness disappears by this time next week. I know it's not high priority, but might as well take the 10 minutes to do it if I'm doing other TM edits.